Днешната сесия за въпроси и отговори ни идва с любезното съдействие на SuperUser - подразделение на Stack Exchange - обединяване на уеб сайтове с въпроси и отговори.
Снимката е предоставена от gynti_46 (Flickr).
Въпроса
Reader на SuperUser Space Ghost иска да знае дали има достъп до BIOS или CMOS по време на стартиране:
For the longest time I have assumed I was entering the BIOS setup and that CMOS is a chip that holds the BIOS settings I set/choose in its memory.
I recently read somewhere that when I am configuring boot order, etc. that it is actually the CMOS setup. I am a little bit confused now, could someone explain this to me?
Има ли Space Ghost достъп до BIOS или CMOS по време на стартиране?
Отговорът
Доставчикът на SuperUser Frank Thomas има отговора за нас:
Both. CMOS stores BIOS configuration information. When you enter setup, you are running the BIOS’s configuration program, which loads the settings defined in CMOS. You are “setting up” the CMOS by providing configuration information the BIOS will use as it runs.
The BIOS is a program written as firmware onto a ROM so that it cannot be written to (except by an all-or-nothing flash operation, which is dangerous, so not an everyday operation). The BIOS ROM stores its configuration information on the CMOS when you hit F10. That is why clearing the CMOS restores your BIOS settings to default and does not delete the BIOS itself, leaving you with an expensive paperweight.
For example, the BIOS has a subroutine that will load the operating system per the boot order. The boot order information, however, (i.e. use first CD-ROM as first device) is stored in the CMOS. If you clear the CMOS, the BIOS will use a default, usually the first disk on the first disk controller that is populated.
Имате ли нещо, което да добавите към обяснението? Звучи в коментарите. Искате ли да прочетете повече отговори от други потребители на Stack Exchange? Вижте цялата тема на дискусията тук.
